StreetBond® CemBase Asphalt Fortifier
Description
StreetBond® CemBase Asphalt Fortifier is a highperformance cementitious, epoxy-modified acrylic based, waterborne surfacing product designed for application on stamped (textured) asphalt pavements only. StreetBond® CemBase Asphalt Fortifier fortifies asphalt pavement to help resist scuffing on weaker stamped asphalt such as driveways or pathways. StreetBond® CemBase Asphalt Fortifier is worker safe, environmentally safe, creates no unpleasant odors (during or after installation) and meets EPA requirements for Volatile Organic Compounds (VOC). StreetBond® CemBase Asphalt Fortifier and StreetBond® SB150 are fully recyclable with the asphalt. StreetBond® SB150's friction properties are suitable for both pedestrian and vehicular applications.
Uses
- StreetBond® CemBase Asphalt Fortifier fortifies asphalt pavement to help resist scuffing on weaker stamped asphalt such as driveways or pathways.
- Applied as the two initial layers in a StreetBond® application over a printed surface that needs fortification.
- StreetBond® CemBase Asphalt Fortifier is combined with StreetBond® Colorants to offer a wide range of colors and can also be combined with StreetBond® Solar Reflective (SR) Colorants to produce a cool pavement surfaces for compliance with LEED specifications for urban heat island mitigation and to provide more comfortable environments.
- StreetBond® CemBase Asphalt Fortifier is applied in two layers as a base coat and must always be covered with at least one layer StreetBond® SB150. For example, if a project would typical require four layers of StreetBond® SB150 on a stamped asphalt surface, a project needing fortification would have two layers of StreetBond® CemBase Asphalt Fortifier applied, followed by two layers of StreetBond® SB150.
Physical Properties
CEMBASE ASPHALT FORTIFIER |
|
Volume Solids |
60% ±2% [ASTM D2697] |
Weight Solids |
74% ±2% [ASTM D2369] |
VOC (calculated) |
<25 g/L |
Freeze Point |
32°F (0°C) |
Density |
14.2 lb/gal (1.70 g/mL) |
Mandrel Bend |
3/8” @ 21°C |
Water Absorption |
¼” @ 21°C |
Permeance |
13.43g/m² / 24hr/mmHg (52 mils) |
|
Application
Temperature |
+50°F to 105°F (Ambient) (10°C to 40°C) |
|
Drying Time
(Touch Dry) |
1-4 hours at 77°F (25°C) and 40% humidity [ASTM D5895] |
|
Taber Abrasion
(Dry) |
0.41 g/100 cycles |
|
Taber Abrasion
(Wet) |
6.92 g/100 cycles |